Trunking Termination Calls per Second (CPS) refers to how many new SIP Trunking call setups are allowed in a second for Trunking Termination (outgoing traffic from your communications infrastructure to the PSTN). Twilio, by default, provides the ability for you to place 1 CPS per Trunk per Region (see limits). Optionally, you may increase your CPS settings per Region for a monthly fee (see pricing).
In order to receive increased CPS, your traffic profile shall comply with the following guidelines:
- Average call duration must be greater than 30 seconds
- No more than 10% of your calls should have a call duration of less than or equal to 12 seconds
- ASR (Answer-Seizure rate) must be greater than 70%
There are two options for increasing Termination CPS for SIP Trunking:
It is possible to make changes to your Calls Per Second (CPS), settings on each individual trunk. Your CPS value can be changed via the Console. Click on the trunk you wish to edit, then go to Termination settings and set the per trunk CPS to a number between 1 and 15.
It is recommended that you provision a trunk for each region with the specific CPS required.
Increasing CPS values may occur anytime during the month, and you’ll be shown prorated charges. Changes will happen immediately upon acknowledgement.
Decreasing CPS values can only be made for the 1st day of the month. It is possible to schedule this change in advance.
If you would like to change your CPS value greater than 15, please reach out to our sales team.
Provision your Master Account with the CPS you require for each Region. Pay per Master Account, per Region. The Master CPS settings are a pooled resource used by any Trunk in the given account or corresponding sub-accounts. We give you the ability to also enforce Trunk level CPS settings in Console, when Master Account CPS is enabled and allow you to over provision CPS at the Trunk level, and you'll only be billed for the Master Account CPS settings.
Master CPS is best fit for your needs if you have several trunks across multiple sub-accounts that need increased CPS, but you aren’t sure what level you’ll need on each of those trunks.
There are two “checkpoints” used to determine when calls will be allowed or rejected.
(1) Actual Calls on each Trunk vs. Trunk CPS Limits: Do actual calls on a specific Trunk exceed the CPS settings set on that Trunk for a given Region?
Yes- Calls start to be rejected based on the Trunk CPS settings
No- Go to next rule
(2) Total Actual Calls across all Trunks vs. Master account CPS Limits: Do total actual calls across all Trunks exceed the Master CPS settings in a given Region?
Yes- Calls start to be rejected based on the Master account CPS settings
No- All calls will go through
Here’s an example of how this works:
Master Account CPS setting:
*North America - Oregon (US2): 25 CPS
|Trunk 1||Trunk 2||Trunk 3||Totals|
|Provisioned||20 CPS||25 CPS||30 CPS||75 provisioned across all Trunks (over-provisioned)|
|Actual Calls||30 CPS||24 CPS||30 CPS||84 actual Terminating Calls attempted across all Trunks|
||Calls capped at 20 CPS||All 24 CPS allowed||All 30 CPS allowed||74 actual CPS allowed based on Trunk CPS settings|
|Cap calls at 25 CPS (calls from any trunk may be rejected|
Twilio has introduced 'Twilio Regions' for isolating the data storage and processing in data centers located in specific geographic locations. For customers who have created a
trunkin a Region other than Ashburn, VA (formerly referenced as us1), you will be required to use Master account CPS to increase the CPS settings on your trunk. If you have
self-served an increased CPS value or spoken with Sales for CPS values greater than 15, you may need to switch from your existing Trunk Level CPS setting to the Master CPS model in order to service your trunks hosted in Twilio regions outside of Ashburn. Please talk to
Salesif you are considering purchasing increased CPS for your Regional Twilio Elastic SIP Trunks.
Twilio will log a
Debugger Alert record when you're CPS limits are reached, our Debugger Alert will tell you which limit was hit; either the Trunk level or Master account CPS level.
These debugger alerts are:
These may be very useful to determine if you need to increase your CPS settings. You can configure Alert Triggers to fire based on your preferences on any Alert error code; optionally, you can also send a corresponding webhook or an email notification.
If you would like to modify your Master Account or increase more than 15 CPS for Trunk Level or decrease Trunk Level CPS, please contact sales here.