Ahoy there! All messaging transmitted using Twilio’s messaging channels is treated as Application-to-Person (A2P) messaging and subject to Twilio’s Messaging Policy. For detailed information on policy rules to ensure you remain compliant while using Twilio’s services, please see our Acceptable Use Policy.
With just a few lines of code, your Python application can send SMS messages with Twilio Programmable Messaging.
This Programmable Messaging Quickstart will walk you through the entire process step-by-step, starting with setting up your Twilio account all the way through sending an SMS using a Messaging Service.
In this Quickstart, you will learn how to:
- Sign up for Twilio and get your first SMS-enabled Twilio phone number
- Set up your development environment to send outbound messages
- Send your first outbound SMS
- Set up your first Twilio Messaging Service
- Send a second SMS from that Messaging Service
By the end of this Quickstart, you’ll have a solid foundation for building and scaling with Twilio’s Programmable Messaging for your specific use cases.
Already have a Twilio account? Go ahead and skip this section.
You can sign up for a free Twilio trial account here.
- When you sign up, you'll be asked to verify your personal phone number. This helps Twilio verify your identity and also allows you to send test messages to your phone from your Twilio account while in trial mode.
- Once you verify your number, you'll be asked a series of questions to customize your experience.
- Once you finish the onboarding flow, you'll arrive at your project dashboard in the Twilio Console. This is where you'll be able to access your Account SID, authentication token, find a Twilio phone number, and more.
We'll use the Twilio CLI (command line interface) for a few tasks, so let's install that next.
Once you have installed Homebrew, run the following command to install
brew tap twilio/brew && brew install twilio
The suggested way to install
twilio-cli is by using Scoop, a command-line installer for Windows. If you don’t already have it installed, visit the Scoop site for installation instructions and then return here.
Note PowerShell will need to be run as an administrator to avoid common permission issues when installing via Scoop.
- Add the
scoop bucket add twilio-scoop https://github.com/twilio/scoop-twilio-cli
- Install the app:
scoop install twilio
twilio-cli can be installed using the Advanced Package Tool (
apt) on most distributions such as Debian, Ubuntu, and Mint.
To do so, run the following commands in your terminal:
wget -qO- https://twilio-cli-prod.s3.amazonaws.com/twilio_pub.asc \ | sudo apt-key add - sudo touch /etc/apt/sources.list.d/twilio.list echo 'deb https://twilio-cli-prod.s3.amazonaws.com/apt/ /' \ | sudo tee /etc/apt/sources.list.d/twilio.list sudo apt update sudo apt install -y twilio
For other installation methods, see the Twilio CLI Quickstart.
twilio login to get the Twilio CLI connected to your account. Visit https://www.twilio.com/console, and you’ll find your unique Account SID and Auth Token to provide to the CLI.
You can reveal your auth token by clicking on the eyeball icon:
If you don't currently own a Twilio phone number with SMS functionality, you'll need to purchase one. With the CLI, run:
twilio phone-numbers:buy:local --country-code US --sms-enabled
Replace US with your ISO-3166-1 country code if you would like a phone number in another country. If you aren't finding any SMS enabled numbers, try looking for a mobile number instead of a local number:
twilio phone-numbers:buy:mobile --country-code DE --sms-enabled
Select a phone number to add it to your account.
Next, we need to install Python and the Twilio Python Helper Library.
If you’ve gone through one of our other Python Quickstarts already and have Python and the Twilio Python helper library installed, you can skip this step and get straight to sending your first text message.
To send your first SMS, you’ll need to have Python and the Twilio Python helper library installed.
If you’re using a Mac or Linux machine, you probably already have Python installed. You can check this by opening up a terminal and running the following command:
You should see something like:
$ python --version Python 3.6
Windows users can follow this excellent tutorial for installing Python on Windows, or follow the instructions from Python's documentation.
Twilio’s Python server-side SDK supports both Python 2 and Python 3. You can use either version for this quickstart, but we recommend using Python 3 for future projects with Twilio unless there are specific libraries your project needs which are only compatible with Python 2.
Please note: Twilio's Python 7.x library only supports Python 3.6+.
The easiest way to install the library is using pip, a package manager for Python that makes it easier to install the libraries you need. Simply run this in the terminal:
pip install twilio
If you get a
pip: command not found error, you can also use
easy_install by running this in your terminal:
If you'd prefer a manual installation, you can download the source code (ZIP) for
twilio-python and then install the library by running:
python setup.py install
in the folder containing the twilio-python server-side SDK library code.
Now that we have Python and
twilio-python installed, we can send an outbound text message from the Twilio phone number we just purchased with a single API request. Create and open a new file called
send_sms.py and type or paste in this code sample.
You’ll need to edit your send_sms.py file a little more before your message will send:
Swap the placeholder values for
auth_token with your personal Twilio credentials. Go to https://www.twilio.com/console and log in. On this page, you’ll find your unique Account SID and Auth Token, which you’ll need any time you send messages through the Twilio Client like this. You can reveal your auth token by clicking on the 'view' link:
send_sms.py and replace the values for
auth_token with your unique values.
Please note: it's okay to hardcode your credentials when getting started, but you should use environment variables to keep them secret before deploying to production. Check out how to set environment variables for more information.
[+][country code][phone number including area code]
to phone number with your mobile phone number. This can be any phone number that can receive text messages, but it’s a good idea to test with your own phone so you can see the magic happen! As above, you should use E.164 formatting for this value.
If you are on a Twilio Trial account, your outgoing SMS messages are limited to phone numbers that you have verified with Twilio. Phone numbers can be verified via your Twilio Console's Verified Caller IDs.
When you send an SMS from your free trial phone number, it will always begin with "Sent from a Twilio trial account." We remove this message after you upgrade.
Save your changes and run this script from your terminal:
That's it! In a few moments, you should receive an SMS from your Twilio number on your phone.
In this code sample, we are making a POST request to the Programmable Messaging API’s Message endpoint in order to create a new outbound message. We are using the
twilio-python library’s built-in
create method, but you could make this request using the Twilio CLI (that you already installed), curl, or a request module of your choosing.
Check out the code samples to send an SMS with the Twilio CLI and curl. Don't forget to update the
Congratulations, you’ve sent your first SMS with Twilio Programmable Messaging and received it on your personal device.
At this point, we have acquired one Twilio phone number and used it to send one outbound SMS. You can imagine a time in the not-so-distant future where you'll need a more robust, feature-rich way to send messages, such as:
- sending many messages over a short period of time
- handling opt-ins and opt-outs
- ensuring that your customers always receive a consistent messaging experience with the same phone number.
In the next part of the Quickstart, we’ll walk through setting up your first Messaging Service. You can think of a Messaging Service as a container to hold all of your available phone numbers (and other senders) and comes with features that you may need along your messaging journey.
Run the following Twilio CLI command to create a Messaging Service that we will use to send our first programmable SMS.
twilio api:messaging:v1:services:create --friendly-name "My first Messaging Service"
Take note of the Messaging Service SID (It starts with “MGXXX...”). We'll need it to send our next message.
Next, add the phone number you just purchased. Forgot the number already? No worries, you can list it with the Twilio CLI:
twilio phone-numbers:list # Grab the SID ("PNXXXX...") of your number
Add your phone number to your newly created Messaging Service with the following command:
twilio api:messaging:v1:services:phone-numbers:create --service-sid MGXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX --phone-number-sid PNXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Sending an outbound SMS from a Messaging Service is similar to sending from an individual Twilio phone number. The primary difference is replacing the
from_ parameter with the
messaging_service_sid to indicate that you are sending from a phone number within your Messaging Service’s sender pool. (Currently, there is only one phone number in your sender pool, so we'll be sending from that one.)
Remember that Messaging Service you just created? Instead of the
from_ parameter and your phone number, use the
messaging_service_sid parameter with the "MGXXXX..." of your Messaging Service SID. Save your changes and run this script from your terminal:
And that’s in to send an SMS using a Twilio Messaging Service! In a few seconds, you should receive a second SMS on your phone from your Twilio phone number. The Messaging Service seamlessly selected your number from its Sender Pool to send that second outbound message.
Now that you've send your first SMS messages, check out the following resources to continue your messaging journey with Twilio:
- Learn about inbound messages with Receive and Reply to SMS and MMS messages
- Want to send with WhatsApp? Check out our WhatsApp Quickstart for Python and our guide to Sending WhatsApp Notifications with Templates
- Build Server Notifications with Twilio Programmable Messaging
- Dive into the API Reference documentation for Twilio SMS
- Track the delivery status of your messages with Python
We can't wait to see what you build!