Menu

Expand
Rate this page:

IVR: Screening & Recording with C# and ASP.NET MVC

IVR Screening and Recording in C#

This ASP.NET MVC sample application is modeled after a typical call center experience, but with more Reese's Pieces.

Stranded aliens can call an agent and receive instructions on how to get off of Earth safely. In this tutorial, we'll show you the key bits of code that allow an agent to send a caller to voicemail, and later read transcripts and listen to voicemails.

To run this sample app yourself, download the code and follow the instructions on GitHub.

Read how Hulu and IVR with scheduling and promised callbacks with Twilio. Also, find more examples and sample IVR code for many web languages on our IVR application page.

Click here to start this tutorial!

Route the call to an agent

When our alien caller chooses a planet, we need to figure out where to route the call. Depending on their input we will route this call to a given extension. Extensions are used to look up an agent. Any string can be used to define an extension.

Once we look up the agent, we can use the <Dial> verb to dial the agent's phone number and try to connect the call.

Loading Code Sample...
        
        
        IVRRecording.Web/Controllers/ExtensionController.cs

        Route the call to an agent

        IVRRecording.Web/Controllers/ExtensionController.cs

        With this information, we present aliens with a list of available agents so they can pick one. Let's see how we look up an agent.

        Look up an agent

        Look up an agent

        When we receive a call from an alien we give them a set of options. In this case, the options are:

        • For Brodo, press 1
        • For Dagobah, press 2
        • For Oober, press 3

        When our alien caller has made their choice we use the key-press to look up an Agent.

        Loading Code Sample...
              
              
              IVRRecording.Web/Controllers/ExtensionController.cs

              Find an agent by extension

              IVRRecording.Web/Controllers/ExtensionController.cs

              Now that our user has chosen their agent, our next step is to connect the call to that agent.

              Transfer the call to an agent

              Call the agent

              This code begins the process of transferring the call to our agent.

              By passing a url to the <Number> noun, we are telling Twilio to make a POST request to the Agent/ScreenCall route after the agent has picked up but before connecting the two parties.

              Essentially we are telling Twilio to execute some TwiML that only the agent will hear.

              Loading Code Sample...
                    
                    
                    IVRRecording.Web/Controllers/ExtensionController.cs

                    Connect the call to an Agent

                    IVRRecording.Web/Controllers/ExtensionController.cs

                    Our agent can now be called, but how does our agent interact with this feature? Let's dig into what is happening in the agent's screening call.

                    See how the agent screens our call

                    The agent screens the call

                    When our agent picks up the phone, we use a <Gather> verb to ask them if they want to accept the call.

                    If the agent responds by entering any digit, the response will be processed by our Agent/ConnectMessage route. This will <Say> a quick message and continue with the original <Dial> command to connect the two parties.

                    Loading Code Sample...
                          
                          
                          IVRRecording.Web/Controllers/AgentController.cs

                          Handle the ScreenCall and ConnectMessage events

                          IVRRecording.Web/Controllers/AgentController.cs

                          Now our agent can interact with the call, but what if our agent is currently out? In these cases it's helpful to have voicemail set up.

                          Set up the agent's voicemail

                          Send the caller to voicemail

                          When Twilio makes a request to our Call action method, it will pass a DialCallStatus argument to tell us the call status. If the status was "completed", we hang up. Otherwise, we need to <Say> a quick prompt and then <Record> a voicemail from the alien caller.

                          We also specify an action for <Record>. This route will be called after the call and recording have finished. The route will say "Goodbye" and then <Hangup>.

                          Loading Code Sample...
                                
                                
                                IVRRecording.Web/Controllers/AgentController.cs

                                Redirect a call to voicemail and end the call

                                IVRRecording.Web/Controllers/AgentController.cs

                                Now let's take a step back to see how to actually record the call.

                                Record the caller

                                Record the caller

                                When we tell Twilio to record, we have a few options we can pass to the <Record> verb.

                                Here we instruct <Record> to stop the recording at 20 seconds, to transcribe the call, and to send the transcription to the agent when it's complete.

                                Notice that we redirect to a URL that is specific to this agent. This is a convenient way to specify which agent was called to produce the voice message. This way we can also save the associated agent together with the voicemail.

                                Loading Code Sample...
                                      
                                      
                                      IVRRecording.Web/Controllers/AgentController.cs

                                      Record a call

                                      IVRRecording.Web/Controllers/AgentController.cs

                                      Legal implications of call recording

                                      If you choose to record voice or video calls, you need to comply with certain laws and regulations, including those regarding obtaining consent to record (such as California’s Invasion of Privacy Act and similar laws in other jurisdictions). Additional information on the legal implications of call recording can be found in the "Legal Considerations with Recording Voice and Video Communications" Help Center article.

                                      Notice: Twilio recommends that you consult with your legal counsel to make sure that you are complying with all applicable laws in connection with communications you record or store using Twilio.

                                      Finally, we will see how to view an agent's voicemail.

                                      View an agent's voicemail

                                      View an agent's voicemail

                                      Once we look up the agent, all we need to do is display their recordings. We bind the agent, along with their recordings, to a View.

                                      It is possible to look up recordings via the Twilio REST API, but since we have all of the data we need in the transcribeCallback request, we can easily store it ourselves and save a roundtrip.

                                      Loading Code Sample...
                                            
                                            
                                            IVRRecording.Web/Controllers/AgentController.cs

                                            Handle the agent's index page

                                            IVRRecording.Web/Controllers/AgentController.cs

                                            That's it! We've just implemented an IVR with real Agents, call screening and voicemail.

                                            What's next?

                                            Where to next?

                                            If you're a C# developer working with Twilio, you might want to check out these other tutorials.

                                            Part 1 of this Tutorial: ET Phone Home Service - IVR Phone Trees

                                            Increase your rate of response by automating the workflows that are key to your business.

                                            Appointment Reminders

                                            Send your customers a text message when they have an upcoming appointment - this tutorial shows you how to do it from a background job.

                                            Did this help?

                                            Thanks for checking out this tutorial! If you have any feedback to share with us, we'd love to hear it. Connect with us on Twitter and let us know what you build!

                                            wellington mendoza Hector Ortega Kat King Andrew Baker Paul Kamp Brianna DelValle
                                            Rate this page:

                                            Need some help?

                                            We all do sometimes; code is hard. Get help now from our support team, or lean on the wisdom of the crowd by visiting Twilio's Stack Overflow Collective or browsing the Twilio tag on Stack Overflow.

                                            Loading Code Sample...
                                                  
                                                  
                                                  

                                                  Thank you for your feedback!

                                                  Please select the reason(s) for your feedback. The additional information you provide helps us improve our documentation:

                                                  Sending your feedback...
                                                  🎉 Thank you for your feedback!
                                                  Something went wrong. Please try again.

                                                  Thanks for your feedback!

                                                  thanks-feedback-gif