How to Send SMS Without a Phone Number Using Alpha Sender and PHP

March 07, 2023
Written by
Reviewed by

How to send SMS Without a Phone Number using Alpha Sender and PHP

Sending messages from a mobile/cell phone is often fine. However, there is an alternative that may be more effective and engaging for your recipients – and more beneficial for your organisation. It's called an Alphanumeric Sender ID.

It allows you to send Twilio Programmable SMS messages using a personalised sender ID (such as a business or organisation name) instead of your Twilio Phone number.

In the screenshot below, on the left, you can see an example of a standard message, where the sending phone number is displayed. On the right, you can see an example of an SMS sent with an Alphanumeric Sender ID instead.

Example of an SMS sent with a phone number and one sent with an Alphanumeric Sender ID

An Alphanumeric Sender ID has some benefits that may be right for you:

  • Your business is instantly identifiable by name. The recipient doesn't have to have your phone number in their contacts to see your name, leading to better open rates
  • Can be used across many different countries without requiring a dedicated phone number in each country
  • There is no charge to use them in most countries
  • You don't need an application endpoint to handle inbound messages, as they do not accept replies

There are some drawbacks too, however:

  • Messages sent from an Alphanumeric Sender ID do not accept replies from recipients. So you will need to provide alternative ways for users to opt out of messages because they cannot send opt-out keywords via reply SMS.
  • They're not supported in all countries. In some countries, they require pre-registration, which can come with a fee.

If you have the right use case, then an Alphanumeric Sender ID can be really beneficial. So let's write some code that uses one, so you can see if it's right for you or not.


To follow along with this tutorial, you will need the following:

Set the required environment variables

For the code to interact with Twilio’s APIs successfully, you need to set three environment variables. These are your Twilio Account SID and Auth Token, and a Message Service SID.

The third variable tells Twilio which Messaging Service to use; we’ll come to that shortly. For now, in your text editor or IDE, create a new file named .env. Then, in that file paste the following configuration.


The Twilio Console Account Info panel

Next, open the Twilio Console and from the Account Info panel, copy your Account SID and Auth Token. Paste these values into .env in place of the placeholders for TWILIO_ACCOUNT_SID and TWILIO_AUTH_TOKEN, respectively.

Set up an Alphanumeric Sender ID

To create a Messaging Service, open the Twilio Console and, starting in the left-hand side navigation menu, click Explore Products > Messaging > Services. Next, click Create Messaging Service.

Messaging Service Setup - Step 1.

Here, in Step 1 Create Messaging Service, enter a name for the Messaging Service in Messaging Service friendly name and leave “Select what you want to use Messaging for” set to the default (“Notify my users”). Then, click Create Messaging Service.

Messaging Service Setup - Step 2.

Now, in Step 2 Add Senders, click Add Senders to open the Add Senders dialog box. Change Sender Type to “Alpha Sender” and click Continue, closing the dialog box.

Messaging Service Setup - Step 2: Add Senders.

Next, enter a value in the Alpha Sender ID field and click Add Alpha Sender. This value is the name of the sender that the user will see when they receive SMS from the application.

Steps 3 and 4 of the setup aren’t required for this tutorial, so click Step 3: Set up integration, then click Step 4: Add compliance info, and finally click Complete Messaging Service Setup.

With the Messaging Service set up, click View my new Messaging Service. From the Messaging Service Properties screen, copy the Messaging Service SID and paste it into .env in place of the MESSAGING_SERVICE_SID placeholder.

Create the PHP application

Now it’s time to get in and write the PHP code. Create a new project directory, where you store your projects, and change into it by running the commands below.

mkdir send-message-with-an-alphanumeric-sender-id-from-php
cd send-message-with-an-alphanumeric-sender-id-from-php

Add the required dependencies

The code will require two dependencies; these are:

  • Twilio's PHP Helper Library: This package simplifies interacting with Twilio’s APIs.
  • PHP dotenv: This package, while not strictly necessary, helps ensure environment variables and other secure credentials are kept out of the code, yet still able to be retrieved and used.

To install them, run the following command in the top-level project directory.

composer require twilio/sdk vlucas/phpdotenv

Create the required code

Create a new file in the project's top-level directory named index.php. In that file, paste the following code and replace <YOUR PHONE NUMBER> with your mobile/cell phone number.


require_once './vendor/autoload.php';

$dotenv = Dotenv\Dotenv::createImmutable(__DIR__);

use Twilio\Rest\Client;

$twilio = new Client(

$message = $twilio
    ->create("<YOUR PHONE NUMBER>",
            "body" => "This is a test message",
            "messagingServiceSid" => $_ENV["MESSAGING_SERVICE_SID"]

print($message->sid) . "\n";

The code starts off by including the required classes and loading the environment variables from .env. Then, using the Account SID and Auth Token, it initialises a new Twilio Client object ($twilio); this is the central object from which calls to Twilio’s API’s are coordinated.

Then, using $twilio, it sends the message “This is a test message” to your phone number with the Messaging Service that you created earlier. When the user receives it, the sender will be shown as the service’s Alphanumeric Sender ID.

Test the application

With the code written, test that it works by running the command below.

php index.php

You should see output similar to the following written to the terminal.


A little while later, you should also receive an SMS that looks like the screenshot below.

Example SMS sent by the application, received on iOS.

That's how to send SMS without a phone number using an Alphanumeric Sender ID and PHP

But it's not all that you can do with Twilio Messaging Services. You can also:

You can find the code for this tutorial on GitHub. Otherwise, what are you building with Twilio Messaging? Let me know on Twitter; I'm @settermjd.

Matthew Setter is a PHP Editor in the Twilio Voices team. He’s also the author of Mezzio Essentials and Docker Essentials. You can find him at msetter[at], LinkedIn, and GitHub.


"kiwanja_san_francisco_texting_10" by Ken Banks is licensed under CC BY 2.0CC BY 2.0